BMW Coding · How-To

Video in Motion: The Most-Requested Coding

Unlock video playback while driving for your passengers — the exact module values for NBT EVO and MGU head units.

01 / BEFORE YOU START

Legal Note & What You Need

Video in motion is intended for passengers. In many jurisdictions the driver watching video while driving is illegal — check your local law and code responsibly. Technically, the change is a single parameter family in the head unit, applied over the ENET connection with E-SYS, or one tap in Bimmercode.

ENET cable (laptop + E-SYS) or Type-C/WiFi adapter (phone + Bimmercode)
Head unit: HU_NBT_EVO (F-Series iDrive 5/6) or HU_MGU (G-Series iDrive 7)
Battery charger recommended for E-SYS sessions

02 / E-SYS METHOD

The E-SYS FDL Steps

Step	Detail
1. Connect	ENET cable, E-SYS connected to the car's target ECU: HU_NBT_EVO or HU_MGU
2. Read FA & SVT	Read the vehicle order, then the ECU list — standard E-SYS workflow
3. Read coding data	Read the head unit's FDL data (always keep the untouched backup)
4. Edit speedlock	Set the video speedlock values to the unlocked state (both thresholds)
5. Write & verify	Write FDL, let the head unit reboot, test playback at low speed

If video still locks: a second speedlock parameter exists on some firmware — both must be edited. Full parameter walkthroughs are in the community wikis linked from our hidden features guide.

03 / BIMMERCODE METHOD

The One-Tap Route

Bimmercode exposes video in motion as an expert-mode coding on supported head units: connect the Type-C or WiFi adapter, select the head unit ECU, toggle the setting, code, done. The app backs up stock values automatically — restore takes the same 30 seconds.

++ / RECOMMENDED GEAR

WIRELESS PRO

ENET WiFi Adapter

$79.99

Wireless DoIP bridge — code from the driver's seat, no cable clutter
Tri-mode WiFi (Client / AP / Router) + USB-C backup connection
Native support for Bimmercode, JET-Pro, E-SYS, bootmod3, MHD
Status LEDs + over-voltage protection · 12-month warranty

Buy Now — $79.99

?? / FAQ

Frequently Asked Questions

Does video in motion work on iDrive 8?

iDrive 8 (newest G-Series) has more locked modules; availability depends on firmware. Diagnostics and most other codings are unaffected — check the G20 coding list for the current state.

Will this affect my rear camera or PDC?

No — the speedlock parameters only gate front-display video sources. Camera and parking functions are separate and untouched.

Can I revert it?

Yes — restore the FDL backup in E-SYS or tap restore in Bimmercode. Always keep the original coding file.